July Featured Product Model AT

The Model AT Linear Modular Anode System is an impressed current linear anode system which permits maximum design flexibility. It consists of a copper cored titanium flat wire coated with mixed metal oxide and attached to a #14 AWG HMW/PE insulated bus wire. The wire pair is surrounded by a flexible plastic mesh. Individual anodes are 50 ft. long and are easily connected in the field to form a hermetically sealed joint. This flexibility allows the design engineer to choose a layout which is best suited for the application.

Perhaps the most significant feature of the Model AT is its unique connector system. Each anode is supplied with a pin connector on one end and a socket connector on the opposite end which can be mated either to another anode section to form a string or to a power feed cable. Specially developed “tee” connectors allow intermediate current feeds on long strings. No splicing or welding is required in the field so installation can be completed in substantially less time than any other system. For example, it takes less than 6 man-hr. to install this anode system in a 60 ft diameter tank.

Model AT         Featured Product for July

Leave a Reply

Your email address will not be published. Required fields are marked *